Products 1-17 of 17
Show
Availability: In Stock
DYS
Item #: BL20A-R -
Specifications:Operates on BLHeli software, pre-programmed for forward/reverse operationVoltage: 7.4V - 14.8V (2-4S lipoly)Current: 20A continuousSize: 31 x 15 x 5.3mm (1.2 x 0.6 x 0.2in)Size with plastic case: 35.2 x 20.7 x 8.3mm (1.4 x 0.8 x 0.3in)Weight without bullet connectors: 5.6grams (0.2oz)Weight with bullet connectors: 9.0grams (0.3oz)Weight with case: 10.8grams (0.4oz)Motor wires: 3.5mm female bullet connectors, 70mm (2.75in) wire length.BLHeli firmware upgradable via signal wire -...
Availability: Discontinued
Common Sense RC
Item #: Z-45 -
All Z-series controllers are fully programmable with the throttle stick. Amp Rating 45A Operating Range 2-5S LiPo 6-12 NiCad/NiMH BEC Current 2.2A Length 60mm Width 28mm Height 8mm Weight 1.3oz. 0-Z-45 Instructions ...
Availability: In Stock
DYS
Item #: DYS30006 -
FeaturesAchieve positive rotation and rollback through regulating motor wires.Advanced heuristic algorithm applied to meet the requirements for motors with different number of magnetic poles.Secure galvanization Function: Once electrified, the motor won't be started immediately no matter where the throttle rocker on remote controller is put.Lost remote controlled signal protection: When the signal transmitted between emitter and receiver is bad or instable, the aero model may be out of...
Spotlight!
Availability: Discontinued
DYS
Item #: XM10A -
DYS XM10A Mini ESC is specially designed for the micro motor with high KV value. Perfectly match with DYS BE1104 KV4000 brushless motors and DYS 3020 Props.Item Name: DYS XM10A Mini ESCInput voltage: 1-3s LipoBEC: NOSize (L*W*H): 23*12*4.5 (mm)Weight: 7.2gModel: mini 10A ESC with BLheli bootloader and BLheli 14.0Signal frequency: 20-500Hz/ Oneshot125 Ultra high speedFirmware:BLHeliContinuouse current: 10AInstant current: 13AFeatures:XM series esc is an upgraded version from SN series, the...
Featured!
Availability: Discontinued
DYS
Item #: BL20 -
DYS are renown the world over for their quality multi-rotor products, we are now pleased to offer their superb range of electronic speed controllers. Each one is flashed with the BLHeliS bootloader and supports OneShot142 to give the end user some of the best possible software available at this time.The DYS range of speed controllers have been designed specifically with multi-rotors in mind, fast throttle response, ultra low resistance MOSFETs, small and lightweight, a thicker PCB for better...
Availability: Temporarily Unavailable
RoboteQ
Item #: FBL2360T -
Roboteq's FBL2360T is a features-packed, medium-current, dual channel controller capable of driving two brushless DC motors up to 60V and 60A per channel. The controller can operate in Trapezoidal mode or Sinusoidal mode with Field Oriented Control (FOC). Several sensors types are supported in order to detect the rotor position and sequence power to the motors' 3 windings in order to generate smooth continuous rotation. The controller can drive sensorless motors in trapezoidal mode.The motors...
Availability: Temporarily Unavailable
RoboteQ
Item #: FBL2360TE -
The FBL2360TE is the latest hardware revision of the FBL2360 motor controller (v2.4) with Ethernet Connectivity and STO. This hardware revision includes support for dual channel resolver feedback for sinusoidal commutation. Roboteq's FBL2360TE is a features-packed, high-current, dual channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth...
Availability: Temporarily Unavailable
RoboteQ
Item #: FBL2360TES -
The FBL2360TES is the latest hardware revision of the FBL2360S motor controller (v2.4) with Ethernet Connectivity. This hardware revision includes support for resolver feedback for sinusoidal commutation.Roboteq's FBL2360TES is a features-packed, high-current, single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation.The...
Availability: Temporarily Unavailable
RoboteQ
Item #: FBL2360TS -
Roboteq's FBL2360TS is a features-packed, medium-current, single channel controller capable of driving one brushless DC motor up to 60V and 120A. The controller can operate in Trapezoidal mode or Sinusoidal mode with Field Oriented Control (FOC). Several sensors types are supported in order to detect the rotor position and sequence power to the motors' 3 windings in order to generate smooth continuous rotation. The controller can drive sensorless motors in trapezoidal mode.The motor may...
Availability: Temporarily Unavailable
RoboteQ
Item #: GBL2660 -
Roboteq's GBL2660 is a features-packed, high-current, dual channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The controller also uses the Hall sensor and/or Encoder information to compute speed and measure travelled distance inside a 32-bit counter. The motors may be operated in open or closed loop speed mode, position...
Availability: Temporarily Unavailable
RoboteQ
Item #: GBL2660E -
Roboteq's GBL2660 is a features-packed, high-current, dual channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The controller also uses the Hall sensor and/or Encoder information to compute speed and measure travelled distance inside a 32-bit counter. The motors may be operated in open or closed loop speed mode, position...
Availability: Temporarily Unavailable
RoboteQ
Item #: GBL2660ES -
Roboteq's GBL2660SE is a features-packed, high-current, single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The controller also uses the Hall sensor and/or Encoder information to compute speed and measure travelled distance inside a 32-bit counter. The motors may be operated in open or closed loop speed mode,...
Availability: Temporarily Unavailable
RoboteQ
Item #: GBL2660S -
Roboteq's GBL2660S is a features-packed, high-current, single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The controller also uses the Hall sensor and/or Encoder information to compute speed and measure travelled distance inside a 32-bit counter. The motors may be operated in open or closed loop speed mode,...
Availability: Temporarily Unavailable
RoboteQ
Item #: KBL1660 -
Roboteq's KBL1660 is a rugged, high-current, features-packed motor controller capable of driving one brushless DC motor up to 60V and 120A. The controller can operate in Trapezoidal mode or Sinusoidal mode with Field Oriented Control (FOC). Several sensors types are supported in order to detect the rotor position and sequence power to the motors' 3 windings in order to generate smooth continuous rotation. The controller can drive sensorless motors in trapezoidal mode.The motor may be operated...
Availability: Temporarily Unavailable
RoboteQ
Item #: MBL1660A -
Roboteq's MBL1660A is a high-current, features-packed motor controller capable of driving one brushless DC motor up to 60V and 120A. The controller can operate in Trapezoidal mode or Sinusoidal mode with Field Oriented Control (FOC). Several sensors types are supported in order to detect the rotor position and sequence power to the motors' 3 windings in order to generate smooth continuous rotation. The controller can drive sensorless motors in trapezoidal mode.The motor may be operated in open...
Availability: Temporarily Unavailable
RoboteQ
Item #: SBLM2360T -
Roboteq's SBLM2360 is a features-packed, medium-current, dual channel controller capable of driving two brushless DC motors up to 60V and 30A per channel. The controller can operate in Trapezoidal mode or Sinusoidal mode with Field Oriented Control (FOC). Several sensors types are supported in order to detect the rotor position and sequence power to the motors' 3 windings in order to generate smooth continuous rotation. The motors may be operated in open or closed loop speed mode, position...
Availability: Discontinued
DYS
Item #: XS20A -
The new DYS XS20A is the latest in ESC technology from DYS, with the all new and powerful BLHeli_S firmware.This DYS XS20A is ready to go with the new BLHeli_S firmware and the high performance Silabs EFM8BB2 50MHz MCU chip. With these upgrades you will be able to run motors with high KV as the EFM8BB2 can handle up to 500k eRPM and will allow you to run 1-2ms signal, Oneshot125, Oneshot42 and Multishot.These XS20As follow DYS's latest trend having pads rather than pre-attached wires to allow...