FingerTech

This D2822/17 Brushless Outrunner is what isused in the FingerTech Viper Vertical and Horizontal Spinner Add-Ons. Its size and power make it ideal for antweight robot weapons.Specifications:KV: 1100rpm/VMax Voltage: 7.2V-11.1V (2S-3S)Max Watts: 102WMax Current: 9.9AMax Resistance: 0.192ΩWeight: 41g (1.44oz)Motor Diameter: 28mm (1.10in)Motor Length: 21.35mm (0.84in). 25.66mm (1.01in) to end of hub extension.Wire Length: 56mm (2.2in)Plug Type: 3.5mm female bullet connectorsShaft Diameter:...

This F2822/17 Brushless Outrunner is what is used in the Viper Vertical and Horizontal Spinner Add-Ons (after June 2020). Its size and power make it ideal for antweight robot weapons.Specifications:KV: 1100rpm/VRPM @ 2S: 8140rpmRPM @ 3S: 12,210rpmMax Voltage: 7.2V-11.1V (2S-3S)Max Watts: 102WMax Current: 9.9AMax Resistance: 0.192ΩWeight: 43g (1.52oz)Motor Diameter: 28mm (1.10in)Motor Length: 21.35mm (0.84in). 25.66mm (1.01in) to end of hub extension.Wire Length: 56mm (2.2in)Plug Type: 3.5mm...

These anodized 6061 aluminum Flat Motor Mounts are used to face-mount motors to flat robot sides. Specifications:- Sold in pairs- Width: 38.1mm (1.5in)- Height: 31.75mm (1.25in)- Thickness: 1.63mm (0.06in)- 11mm hole pattern for Antweight motors such as Gold Spark, Silver Spark, etc. Uses 2-56 button head screws.- 17mm hole pattern for Beetleweight motors such as Kitbots 1000RPM, etc. Uses M3 countersunk screws.- 18mm hole pattern (not pictured, new revision) for Beetleweight motors such as...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

These anodized aluminum motor mounts will fit just about any small motor with mounting hole distances from 10mm - 12.5mm (0.39 - 0.49in). Especially suited to both Gold and Silver Spark motors, they will also hold all Mini Metal Gearmotors small Copal motors, Maxon motors, etc.Specifications:- Width: 16mm (0.63in)- Height: 19.8mm (0.78in)- Length: 18.6mm (0.73in)- Thickness: 1.45mm (0.057in)- Shaft height: A motor with 11mm hole spacing will raise the motor shaft up to 11.7mm (0.46in).- Seven...

• This Brushless Inrunner is what is used in the FingerTech Beater Bar Electronics. Its size and power make it ideal for beetleweight robot weapons (and aggressively ambitious for antweight weapons!)• With an inrunner, you don't have to worry about wires getting caught by a spinning outer can.Specifications:RPM/V: 2970kvMax Load: 22AMax Volts: 14.8v 2s~4sMax Watts: 300wResistance: 0.0500ΩWeight: 98.71gMotor Diameter: 28mm (1.10in)Motor Length: 38mm (1.49in). 50mm (2.16in) to end of...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

Want to use our Silver Spark gearbox with your own motor? Stripped one out during combat? Maybe you just want some spares for the next event. Here you go!- Easy to replace - just two screws.- Weight: 11.8g (0.416oz)- For more specs and information, see the Silver Spark product pages.0-FT-GB22

Want to use our Silver Spark gearbox with your own motor? Stripped one out during combat? Maybe you just want some spares for the next event. Here you go!- Easy to replace - just two screws.- Weight: 11.8g (0.416oz)- For more specs and information, see the Silver Spark product pages.0-FT-GB33

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...