Project Motors

A great mini gearmotor, at a decent price. The GM12a has a brass front faceplate, not steel.Here are the performance measurements:Running at 3V:Free running speed: 85rpmFree running Current: 18mAStall Torque: 15.6 in*ozStall Current: 290mARunning at 6V:Free running speed: 169rpmFree running Current: 32mAStall Torque: 27.2 in*ozStall Current: 456mADimensions: 30.4 x 12.0 x 10.1mmShaft length: 9.3mmShaft diameter: 3mmCentered 3mm output shaftWeight: 9.3gRatio: 100:1Starts at 0.43V @ 14mACheck...

This miniature, high-torque gearmotor has a 1000:1 gearbox, making it a great choice for applications requiring fine control at very low speeds. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft.Note: Because of the high gear ratio, these motors can generate enough torque to damage themselves, so you should avoid stalling them. Also note: this gearbox is longer than that of most 12mm micro gearmotors, so our micro metal gearmotor brackets will not fit this motor....

This 143:1 gear motor spins at 70RPM at 5V, drawing 670mA at stall generating 43 in*oz torque (free running at 57.6mA). With a 7mm double-flat output shaft (avoid using the green double flat output - it's not meant to take rotational load), and a built-in clutch and built-in mounting screw holes, you can see why we like these motors! Gear Ratio 143:1 Unloaded RPM (3V) 40 Unloaded RPM (6V) 78 Unloaded Current (3V) 50 mA Unloaded Current (6V) 52 mA Stall Current (3V) 400 mA Stall Current (6V)...

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, high-power motor with 30:1 metal gearbox, similar to Sanyo's popular 12 mm gearmotors. The gearbox has a long (0.365" or 9.27 mm), 3 mm-diameter D-shaped metal output shaft, and the brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch). It weighs approximately 0.35 oz (10 g). These tiny, high-quality motors are intended for use at 6V. In general, these kinds of motors can run...

This 35:1 micro geared motor is a bit larger than our other ones. Nearly twice the weight, this is the one to use if you forsee needing a more durable drive motor. Its fast too! 1050 rpm makes it the fastest micro geared motor we sell. NOTE: The 4.5mm long shaft is too short to use with our Mini Aluminum Hubs. Use the FingerTech Lite Hubs instead.  Specifications at 4.5V: 35:1 - GM19 Typical operating voltage 1.7-5.0VDC No load speed 1050 rpm No load current 130 mA load current 500...

This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 46.85:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox.Key specs at 6 V: 200 RPM and 550 mA (max) free-run, 115 oz-in (8.5 kg-cm) and 6.5 A stall.Note: Stalling or overloading gearmotors can greatly decrease their lifetimes and even result in immediate damage. For these...

By popular demand, we now offer a high torque Copal motor!Specifications:6VDC Nominal250mA nominal current1.6A stall currentGear Ratio: 240:1Rated torque: 6.94 oz-in nominalMax torque: 56 oz-inNominal speed: 55 rpmNo load speed: 60 rpmWeight: 25g (.88oz)shaft size: 3mm diameter0-HG16-240-AA

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

SpecsWeight: 7 oz.Motor Shaft Size: 3.2 mm ( just under 1/8”)Use a 25 amp fuseFor a Speed Controler - also called an “ESC”, use one rated min. 20 amps#16 wire for connectionsNote: capacitors are built in this motor.Battery: uses 7.2 volts - 6 cells FeaturesMade with Ferrite Magnets.Built-in capacitorsRuns with 6-7 cellsFor both direct drive and geared systems0-MASG3550

The Renegade Encoded Planetary Gear Motors were made to provide the lowest possible power consumption and duty cycle. These are default motors used in the OS Bots Renegade bases. They are designed to be run at 12V. Each motor comes with a 8" cord that plugs into the motor for encoder and power input (connector has .1" standard header spacing) Specs Operating Voltage 12V Operating Temperature -10° to 60° C No Load Current ≤ 350mA No Load Speed 223 +/- 10% RPM Rated Load Torque...

This powerful little motor is a great all-purpose 550-size DC motor. It has been a top seller for us for years.Fully reversible, two 3mm mounting holes on the face, which are exactly 25mm apart, so it will fit on many gearboxes designed to fit 550-size motors. Speed : 23,000 rpm @ 12V Angular velocity constant: 1916 rpm/V Amps @ nominal: 1.8 Amps Stall current: 91.8 A Weight: 7.50 oz (213 grams) Diameter: 1.41" (35.8mm) Length: 2.24" (57mm) Shaft diameter: 3.17mm Shaft length: 9.5mm...