Multirotor Parts

4-in-1 Control Unit Mounting Frame: mQX0-BLH7539

0-MIC261-04

F2206 Power combo setType: Power comboApplication: For multicopter DIYPackage ContentsPackage Contents: 2 x CW BE2206 1950KV Motor, 2 x CCW BE2206 1950KV Motor, 4 x BL30A BLHeli ESC, 3 x 6045 CW Propeller, 3 x 6045 CCW Propeller, 6 x Propeller Ring, 4 x Accessory Set0-F2206

This is the Body/Frame for the 1Si Quadcopter from Helimax.FEATURESTwo-piece plastic constructionBattery compartment and LED light on bottom halfGray and neon green color schemeINCLUDESBody/Frame for the 1Si Quadcopter0-HMXE2244

These are the Control Board Dampeners for the 1SQ Quadcopter from Heli-Max. Installs on each corner of the bottom of the control board to cushion and insulate board from shock. Four rubber Control Board Dampeners (key #6) included.0-HMXE2180

These are the Foot Pads for the 1SQ Quadcopter from Heli-Max. Installs on each motor cover on the four booms. Four rubber Foot Pads (key #11) included.0-HMXE2163

This is the Frame Battery Holder for the Heli-Max Axe 1SQ Quadcopter. Plastic construction. Battery slides into holder.0-HMXE2179

These are the Motor Covers for the Heli-Max Axe 1SQ Quadcopter. Plastic construction. Installs on bottom of each motor.0-HMXE2182

This is the Receiver Mount for the 1Si Quadcopter from Helimax.FEATURESPlastic constructionINCLUDESTwo Receiver Mount Straps0-HMXE2245

This is the TAGS-FX Control Board for the 230Si Quadcopter UAV from Heli-Max. Replaces damaged TAGS-FX control boards. TAGS-FX with Sensor Fusion Technology integrates data received from a 3-axis gyro and a 3-axis accelerometer and immediately corrects unwanted movement in yaw, pitch and roll, and also prevents drift in any direction.0-HMXM2054

This is the V-Cam Video/Picture Camera for the 1SQ V-Cam Quadcopter from Helimax.FEATURESCompletely assembled and prewiredRecords 1280x720 30fps videos in avi format1SQ RTF also takes 1MP still photos in JPEG formatOn-board LED indicates recordingINCLUDESV-Cam Video/Picture Camera, key #8SPECIFICATIONSDimensions: 1-1/2 x 3/4 x 1/3" (38.1 x 19 x 8mm)COMMENTSDoes not include micro SD card. jxs 07/26/130-HMXZ0001 ...

Includes 1 mother board, 1 daughter boardThis item also includes 1 switchParrot recommends the main board for the Jumping Sumo0-PTAPF070090

0-MIC261-11

0-MIC265-07

This item contains two clockwise rotation propellers for the IMEX Voyager Micro Quad.0-MIC1280-03

This is the USB charge cord for the IMEX Voyager Micro Quadcopter. It contains one USB cord to charge your quadcopter from.0-MIC1280-12

Description:Item Name: Eachine MINI APM V3.1 Flight Controller With GPSHardware version: V3.1Dimension: 35 x 35mmWeight : about 22gSupport mode: fixed wing,multi-rotorInterface: 8 output, 8 way output, GPS, telemetry +OSD, I2C (for external Compass), voltage and current detection input, USB, power supply inputFEATURESFunction and firmware are the same as APM, can be used in fixed wing and multi-rotor.GPS with onboard compass8-CH output and 8-CH inputCan connect to external GPS,telemetry system...

Replacement motor for the IMEX Hover Quad Multirotor. Note the red and blue wires to determine which motor you need.0-MIC265-15

0-MIC261-12

0-MIC261-09

This is the Canopy for the Red and Black Dromida Ominus Quadcopter. Plastic construction. Ominus logo on top and red accents on both sides.IncludesCanopy, key #10-DIDE1101

This item contains two counter clockwise motors for the IMEX Voyager Micro Quadcopter.0-MIC1280-06

These two replacement motors are for the IMEX Voyager Micro Quadcopter. It contains two clockwise rotation motors.0-MIC1280-05

0-MIC261-06

0-MIC261-08

0-MIC261-01

0-upg7117

0-UPG8200

0-UPG8209

0-UPG8202

This item contains two counter clockwise (reverse) propellers for the IMEX Voyager Micro Quad.0-MIC1280-04